CX/GL 500 Head gasket X 2 (pair)
$42.00
These are the same gaskets Joe Hovel had made, and I am getting them from the same source so no changes.
*Please note that you must use sealant with the 500 head gaskets. Copper Permatex Spray-A-Gasket High Temp is Murray’s recommendation.*
instructions are the same – see here.
the gaskets are sold in pairs and include 2 viton head gasket orings
the price is for 2 gaskets
These are the same gaskets Joe Hovel had made and i am getting them from the same source so no changes
instructions are the same – see here.
*Please note that you must use sealant with the 500 head gaskets. Copper Permatex Spray-A-Gasket High Temp is Murray’s recommendation.*
CX500 Manual 6-15: Install the O-rings and dowel pins.
Coat the cylinder and head surfaces with liquid
sealer, and install the head gasket. Make sure
that the oil orifices are not covered by the gasket.
Instructions can also be found in section 6 of the Honda CX500 service manual.
the gaskets are sold in pairs and include 2 viton head gasket o-rings.
the price is for 2 gaskets
| Weight | 1 lbs |
|---|
4 reviews for CX/GL 500 Head gasket X 2 (pair)
Only logged in customers who have purchased this product may leave a review.
Related products
Ian Towle (verified owner) –
10 out of 10
Mark Lembo (verified owner) –
received the order quickly
David Forchheimer (verified owner) –
fit perfectly and heavy duty materials
Jesse (verified owner) –
Quality gaskets from a reputable seller, looked up to in the CX500 community as well as others. Thankful for all Murray’s Carbs does!