This is a mechanical water pump seal for the Honda CX and GL line of motorcycles. It’s the larger seal diameter to suit the later bikes – the smaller, earlier one is no longer available so the older bikes will have to Shep the seal or ream the hole to suit the larger size seal.
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
8 reviews for Mechanical Water Pump Seal for Honda CX500, GL500, CX650, GL650
Only logged in customers who have purchased this product may leave a review.
Related products
All Gaskets
$10.00
All Gaskets
$42.00
$12.00
All Gaskets
$9.00
All Gaskets
$8.35
All Gaskets
$14.00
All Gaskets
$7.00
All Gaskets
$10.00
NICHOLAS A. (verified owner) –
Great seal. Seems to be just as good as factory, but for a much better price. Thanks Murray!
Ben Getz (verified owner) –
Cheap at twice the price
Jason Hardman (verified owner) –
Worked perfectly
Matt F. (verified owner) –
Should be more transparent to note that the metal bushing this fits into DOES NOT fit CX500 bikes prior to ’82. you must reuse the OEM version and should take care when removing the old
Murray (store manager) –
it is not us that needs to be more transparent in 1987 honda stopped making the earlier seal and so began the 2 different get around
is you have read up anywhere you would have run into the thing about reusing the old cup called the “shep method” been so since the early 90s
or using a flap disc to enlarge the seal bore if the rear cover is off.as I said this is a well know and hugely documented item for the last 25 years plus
there is only one seal the later larger one not my issue to be transparent about
Matthew Bass (verified owner) –
Just what I needed to fix my leak! Such an easy fix, wish I did it sooner.
Jonathan Verzi (verified owner) –
Part came it was exactly what I needed
Jarrod Clymer (verified owner) –
Recommended on CX500 forum. Perfect fit and very reasonably priced.
Howard (verified owner) –
Always excellent service and knowledge
Uploaded image(s):