Everything included in Murray's Kawasaki KZ400 LTD Single MIkuni Carburetor Kit. This stock replacement is a performance upgrade.

KZ400 LTD Single Carburetor Kit | Mikuni VM34

Name: KZ400 LTD Single Carburetor Kit | Mikuni VM34
SKU: KZ400LTD-SINGLE-CARB-KIT
Availability: InStock

$421.50

Murray’s Kawasaki KZ400 LTD Carburetor Kits come Pre-Jetted, Synced, and ready to Plug and Play for more Horsepower, Torque, Throttle Response, and Drivability.

*Requires some frame modification*

*INTAKE MANIFOLD NOT SOLD SEPARATELY*

For KZ400 non-ltd models please CLICK HERE

Do you want a Quick Turn Throttle Tube to go with the carb set?

Bike Year *

Exhaust type *

2 into 2 without H-box (Twins Only))

2 into 1 (Twins Only)

4 into 4

4 into 2

4 into 1

other *include in notes*

Notes

Do you need a VACUUM PORT for a Vacuum Petcock? *A vacuum-operated petcock relies on a vacuum line or hose to supply fuel to the carburetors. This can often be determined if there is a prime position on the petcock, but not always. OEM Honda vacuum petcocks do not, for instance. A reliable indicator is your petcock will have two outlets. One for fuel and the other will likely be for a vacuum source.

SKU: KZ400LTD-SINGLE-CARB-KIT Categories: Carb Kits, Kawasaki, Kawasaki Carb Kits, KZ400, KZ400 LTD

Description
Additional information

Murray’s Kawasaki KZ400 LTD Carburetor Kit is a truly bolt-on solution and upgrade to your old stock Keihin carburetors. After a quick 20-30 minute install you’ll be riding away with more horsepower, a lot more torque, and unmatched throttle response for your vintage motorcycle or custom build. Each carburetor kit goes through rigorous testing during development to ensure we deliver the best carbs on the market. Your carburetor kit will be delivered pre-jetted and calibrated to your motorcycle’s specifications.

Murray’s Kawasaki KZ400 LTD Carburetor Kit Includes:
1 Pre-Jetted Mikuni VM34 Carburetor
1 Custom Tuned Intake Manifold
1 Genuine Mikuni Spigot Mount
1 Pod Filter
1 Throttle Cable
All Installation HardwareNew

NGK Iridium spark plugs and a good in-line fuel filter are recommended.

*Use the “Notes” section for any pertinent info about your bike that would change jetting or calibration. If you have questions about this please give us a call*

*CALL OR EMAIL US IF YOU NEED A CUSTOM CABLE CONFIGURATION. CONTACT INFORMATION AT THE BOTTOM OF THIS PAGE*

FRAME MODIFICATION: Use the pictures and directions below to modify your frame for Murray’s KZ400 Ltd Carburetor Kit.

It is very important that you do not cut into the welds on the frame. Use the picture below for reference.

If you have to remove the tank bolt tab off of the frame to cut the frame tube here is an example of a new bracket that can be fabricated out of a piece of angle iron, and bolted or welded into place.