Matt, from www.sparckmoto.com, and i worked to make these the best and easiest MOSFET upgrade possible for the Triumph Motorcycles. They are plug and play to your stock harness. The bolt holes in the heat sink will even bolt back up in the stock location if you want so no wiring, no guessing and they even come with new heavy duty connectors and terminals for the harness end in case yours are cracked sunburnt or melted.
Voltage regulation set at 14.4V and safe for use with LI-ION batteries
The regulator rectifiers are 400 Watt continuous and 600 watt intermittent which is well over double the amount of the stock ones. This way if you want to install a 250 300 or 350 watt heavy duty stator to keep your self nice and warm or run a 200 watt stereo amp maybe light up a highway go to it, but remember you will need to upgrade your main fuse to match the output of your bigger stator. These will work with all battery types and are warrantied for 1 year so plug play and go riding!
They’re 400 Watt continuous and 600 Watt peak (not amp).
To make the install easier each Triumph MOSFET regulator is sent with the connectors unclipped so that you can easily slip the lead into place. Please see the diagram below to properly fit your connector once in place.
For the MOSFET extension cables please see this product.
| Weight | 2 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
1 review for Triumph Motorcycle Direct Plug and Play MOSFET Regulator Rectifier
Only logged in customers who have purchased this product may leave a review.
Related products
Honda
Harley-Davidson
Daniel T. (verified owner) –
Excellent fit and a better unit than stock!